Blog
-
It’s an ongoing project for Robot development for Robogrinder: an undergraduate engineering design team at Virginia Tech that competes in the DJI RoboMaster University Championship. This circuit board is a digital power converter for charging or discharging the super capacitor. STM32 g474 is used as the main controller to provide a precise wave (up to…
-
High-power DC motor driver which is implemented by H-bridges. N-Mosfet and MOSFET drivers are the main components of this circuit board. INputs from MCU are required for driving this board. A maximum of 4 DC motors can be derived by this board. This project is for a driver for a drone that has 4 Mecanum…
-
A project for developing super capacitor charger for Robogrinder.
-
A battery protection board. Include 6 18650 lithium batteries. Tested voltage 24v, 120w output is ok.
-
It’s a finished project for Robot development for Robogrinder: an undergraduate engineering design team at Virginia Tech that competes in the DJI RoboMaster University Championship. This project is aimed at providing power to mini-pc, ammo system, and gimbal system. These boards are used in the current competition. Details will not be talked about because of…
-
INA226 voltage and current detector module, easy plugin and easy to setup, I2C connection between module and MCU
-
STC8a8k development board with OLED screen and buttons. lc12s(wireless uart module) and tb6612fng(12v motor driver) are embedded in this board. USB type-c socket for download. elin66alpha/stc8a8k-44pin-Starter-Code: stc8a8k-44pin-Starter-Code (github.com)
-
Very small package of UART USB adapter.
-
-
Implemented on raspberry 3b with python, opencv2. Detects the face and feedback on the position, Through the gpio, adjust the servo to aim at the face.